SITTING OUT PROGRAM :
1. Press COGO
2. Select Set Out coord
3. Insert staion point coordinate & backsight coordinate.
4. Insert coordinates for points which need to fixed .
5. There are two cases : -
A - in case the points are not registered in the memory Insert point
number Then Insert the coordinates Then press (Func CTRL + ENTER).
B - in case the points are registered in the memory can be added by click
on the ALL, then Add all POS to List shows all the points in the screen.
6. Select the point by arrow then press ENTER.
8.
Turn the total station to become a value dh.o = 0.
9. Put the prism in same total station direction Then press Reading key.
10. Insert the reflector height then press (Func CTRL + ENTER).
11. Screen appears showing the reflector current location
from the true location of the point.
12. Move the reflector as follows: -
• in : means move toward the device.
• Out : means moving away from the reflector device.
13. Press reading key untill the values become ( Left / Right = 0 _ in / Out = 0 )
14. Press (Func CTRL + ENTER) Then press Yes in order to save the results
or NO to don't save.
15.Repeat the process with the next points.
Read more:
Read how to Activate Autocad Civil 3 D 2018 and download X-force Cracks Click here
↭ Civil Engineering 2018↭
No comments:
Post a Comment