TOPOGRAPHY:
1. Click on Func
2. Select JOB
3. Click NEW then write the name of the file and select the
Point ID then press (Func CTRL + ENTER) twice.
4. Click on survey
5. Select Topography then press (Func CTRL + ENTER)
6. Screen appears showing the beginning of the numbering and
points save format then press (Func CTRL + ENTER)
7. Insert coordinates of the station then press (Func CTRL +
ENTER)
8. Insert number the backsight then press ENTER
9. Shows two options - Azimuth and Coord
10. If the backsight point known as coordinates select
Coordinates
11.Insert point coordinates then press (Func CTRL + ENTER)
12.Orient to the backsight point then press on reading key or
DIST.
13. Insert high of reflector then press (Func CTRL + ENTER)
14. .Orient to the first point then press on reading key or
DIST
15. Insert high of
reflector then press (Func CTRL + ENTER).
16. Orient to the second point then press on reading key or
DIST
17. Continue until the complete .
18. To show the drawing for the points press (Func CTRL then
(+/-)).
19. To show the list of points (Func CTRL (0)) Then select
the point Then press Enter
20.Then press Pos Then press Esc Then select second point and do same steps .
20.Then press Pos Then press Esc Then select second point and do same steps .
Read more:
Read how to Activate Autocad Civil 3 D 2018 and download X-force Cracks Click here
↭ Civil Engineering 2018↭
No comments:
Post a Comment