Monday 17 December 2018

SITTING OUT PROGRAM OF SOKKIA TOTAL STATION



    SITTING OUT PROGRAM : 


1. Press COGO
2. Select Set Out coord
3. Insert staion point coordinate & backsight coordinate.
4. Insert coordinates for points which need to fixed .
5. There are two cases : -
A - in case the points are not registered in the memory Insert point number Then Insert the coordinates Then press (Func CTRL + ENTER).
B - in case the points are registered in the memory can be added by click on the ALL, then Add all POS to List shows all the points in the screen.
6. Select the point by arrow then press ENTER.
8. Turn the total station to become a value dh.o = 0.
9. Put the prism in same total station direction Then press Reading key.
10. Insert the reflector height then press (Func CTRL + ENTER).
11. Screen appears showing the reflector current location from the true location of the point.

12. Move the reflector as follows: -
• in : means move toward the device.
• Out : means moving away from the reflector device.
13. Press reading key untill the values become ( ​​Left / Right = 0  _ in / Out = 0 )
14. Press (Func CTRL + ENTER) Then press Yes in order to save the results or NO to don't save.
15.Repeat the process with the next points.



Read more:
SOKKIA TS setup in Urdu
CBR test Data Observations & Calculations
Read how to Activate Autocad Civil 3 D 2018 and download X-force Cracks Click here

↭ Civil Engineering 2018↭
Posted by on No comments:

Sunday 16 December 2018

HOW TO DO TOPO ON SOKKIA | HOW TO USE SOKKIA TOTAL STATION | USE SERIES X SOKKIA






TOPOGRAPHY:


  PRESS ON PROGRAME TO INTER TO THE SDR 
1. Click on Func
2. Select JOB
3. Click NEW then write the name of the file and select the Point ID then press (Func CTRL + ENTER) twice.
4. Click on survey
5. Select Topography then press (Func CTRL + ENTER)
6. Screen appears showing the beginning of the numbering and points save format then press (Func CTRL + ENTER)
7. Insert coordinates of the station then press (Func CTRL + ENTER)
8. Insert number the backsight then press ENTER
9. Shows two options - Azimuth and Coord
10. If the backsight point known as coordinates select Coordinates
11.Insert point coordinates then press (Func CTRL + ENTER)
12.Orient to the backsight point then press on reading key or DIST.
13. Insert high of reflector then press (Func CTRL + ENTER)
14. .Orient to the first point then press on reading key or DIST
15.  Insert high of reflector then press (Func CTRL + ENTER).
16. Orient to the second point then press on reading key or DIST
17. Continue until the complete .
18. To show the drawing for the points press (Func CTRL then (+/-)).
19. To show the list of points (Func CTRL (0)) Then select the point Then press Enter 
20.Then press Pos Then press Esc Then select second point and do same steps .



Read more:
SOKKIA TS setup in Urdu
CBR test Data Observations & Calculations
Read how to Activate Autocad Civil 3 D 2018 and download X-force Cracks Click here

↭ Civil Engineering 2018↭

Posted by on No comments:

RESECTION FOR SOKKIA | HOW TO USE SERIES X




    RESECTION :

1. Click on the Menu then Resection
2. Select N E Z
3. Insert coordinate for the first point useing keyboard Or recall from the memory
4. Click on NEXT then Insert coordinate for the second point useing keyboard Or recall from the memory
5. Click on Ok
6. Orientate to the first point then click on DIST
7. Click on YES
8. Orientate to the second point then click on DIST
9. Click on Ok
10.Click on Ok then click on YES .

***********************************************************       


***********************************************************



Read more:
SOKKIA TS setup in Urdu
CBR test Data Observations & Calculations
Read how to Activate Autocad Civil 3 D 2018 and download X-force Cracks Click here

↭ Civil Engineering ↭

Posted by on No comments:

HOW TO USE SOKKIA TOTAL STATION | USE SERIES X SOKKIA | SITTING OUT PROGRAM DEFINITION




 1). Sitting out program definition : 

     1. Press  ESC up to get main page then click on the Menu.
2. From COGO menu Choose Setting Out.
3. Repeat the steps from 4-7 (in the topography).
4. Press on (5.key in coord).
             5. Following screen appears.


6. Press ADD then insert coordinates value then press OK.
7. Continue until complete insert all the points.
Note: - If the points were already registered in the memory can be recall by click on the READ.
8. Select the point need to fix in the site then press ENTER.
9. Screen shows an analysis of the location of the point , make the angel zero.
10. Put the Prism in the same direction of the instrument then press DIST.
11. Move the Prism to find the point to be set out.
        12. Repeat the same steps with the others points.

looking for how to:

    1.                       Sitting out program definition  
    2.                   Sitting out program methods
    3.                    Missing line measurement (MLM)
    4.                    Area calculation definition
    5.        Area calculation and subdivision
    6.       Fixed point subdivide
    7.       Parallel line sub
    8.                    Resection definition 
    9.        Resection methods
    10.        Topography methods 
    11.          Registration points in the memory by keyboard input
    12.       Set out line program
    13.         Transfer the data using the flash memory
    14.        Receive the file in the computer.

Read more:
SOKKIA TS setup in Urdu
CBR test Data Observations & Calculations
Read how to Activate Autocad Civil 3 D 2018 and download X-force Cracks Click here

↭ Civil Engineering 2018↭
Posted by on No comments:

MISSING LINE MEASUREMENT (MLM) | HOW TO USE SOKKIA TOTAL STATION | USE SERIES X SOKKIA




   3).  MISSING LINE MEASURMENT (MLM)


1. Put the reflector in the first point then press Dist.

2. Put the reflector in the second point then press Menu then MLM

3. Show the distance between the first and second point with the rate of tilt between the two points.

4. To measure the distance between 2 and 3 press Move then Yes, and then Put the reflector in the third point then press MLM and continue till finished.

   looking for how to:

  1.                    Sitting out program definition  
  2.                   Sitting out program methods
  3.                    Missing line measurement (MLM)
  4.                    Area calculation definition
  5.        Area calculation and subdivision
  6.       Fixed point subdivide
  7.       Parallel line sub
  8.                    Resection definition 
  9.        Resection methods
  10.        Topography methods 
  11.          Registration points in the memory by keyboard input
  12.       Set out line program
  13.         Transfer the data using the flash memory
  14.        Receive the file in the computer.



Read more:
Clearing and Grubbing specification and methods
Asphalt milling | What is milling work
Topcon T S setup step by step with details
SOKKIA TS setup in Urdu
Compressive strength of concrete cube test
Road Cross Section Details
CBR test Data Observations & Calculations
Read how to Activate Autocad Civil 3 D 2018 and download X-force Cracks Click here

 ↭ Civil Engineering 2018↭
Posted by on No comments:

AREA CACULATION DEFINITION | HOW TO USE SOKKIA TOTAL STATION | USE SERIES X SOKKIA




   3). AREA CACULATION DEFINITION


1. Click on the Menu then AREA CACULATION.
2. put reflector in the first point then press MEAS then Dist.
3. Press yes.
4. repeate step from 1 to 3 with all points until the complete all points .

5. Click Calc .


 Looking for how to:

  1.                       Sitting out program definition  
  2.                   Sitting out program methods
  3.                    Missing line measurement (MLM)
  4.                    Area calculation definition
  5.        Area calculation and subdivision
  6.       Fixed point subdivide
  7.       Parallel line sub
  8.                    Resection definition 
  9.        Resection methods
  10.        Topography methods 
  11.          Registration points in the memory by keyboard input
  12.       Set out line program
  13.         Transfer the data using the flash memory
  14.        Receive the file in the computer.



Read more:
Clearing and Grubbing specification and methods
Asphalt milling | What is milling work
Topcon T S setup step by step with details
SOKKIA TS setup in Urdu
Compressive strength of concrete cube test
Road Cross Section Details
CBR test Data Observations & Calculations
Read how to Activate Autocad Civil 3 D 2018 and download X-force Cracks Click here

 ↭ Civil Engineering 2018↭

Posted by on No comments:
Subscribe to: Posts (Atom)